Products Details

Range of IMS IRW 202-DLX 2 open care system that comes in fiber and powder coated MS allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self-check on the electronic circuitry skin/air/manual control. latest technology packed with higher accuracy & enhanced visibility has been integrated in the system

Control Panel
The IMS IRW 202 - DLX 2 open care system comes with automatic manual and baby (servo) modes. Big separate display for both skin and air temperature display can be converted from C to f, by the push of a button. A big LCD is provided. Formore information and visualizations of the heater power in manual and servo modes. A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of

• High Temp. / Low Temp   • Power Failure   • System Fail

• On Probe Failure   • Heater fad / On Optional) on, visual alarm provided.

Heater Assembly
The heater assembly located above the center of the support structure consists of an integral examination light and a 650 watts heating system (Silica/Quartz/Ceramic Heater for quick warming and even distribution of heat on the baby bed The heater can be swiveled in either direction for taking, X-ray and doing procedures. The Heater is also equipped with LED Phototherapy on both side to provide light intensity effective on the baby bed.

Air Mode
the system comes with air sensor. This is added security cover with exclusive feature of switching off the heater in case the AIR temperature goes above 39 c, irrespective of what the skin temperature is at the time of event.

Technical Specification
Height: 1850mm
Length: 1050mm
Width: 650mm

Electrical Specification
Power Specification
Heater Power 650 Watts
Fuse: 5 Amp

Additional Features
If needed the unit can be programmed try the user itself for any of the following, features
(a) Count up/down Timer
(b) Check baby Alarm, (Optional)
(C) Pre warming mode.

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit

Baby Bed
The spacious baby bed incorporates easy drop down/ fold down glasses for Maximum access to the patient Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing Led Phototherapy IMS IRW 202-DLX2 comes with choice of highly efficient and bright 12/15 choice of LEDs on each side of the heater. The strong lux of 24/30 LED's cure jaundice in baby rapidly.

• Infant Resuscitator
• The range how adjustment is 5LPM9, 15LPM.
• The MAX-P and PIP are safe, controlled and accurate.
• The PEEP is constant and accurate.
• Simple operation and flexible application.

Technical Specification
Light Source, High Bright Blue/Whit LEDs

Inbuilt Printer
Manual printer fitted in the unit gives you real time printout of the event when required by pressing the switch on the control unit

Optional
Resuscitator, suction, oxygen